Publications of 2013

Book
Martin Rieger Lärmschutzwlement Phalanx R200 Publikation in PURE anzeigen
Martin Rieger Door Panel Stiffness Publikation in PURE anzeigen
Andreas Marn Wellenstranganalyse eines Refiners, Projekt 3 Publikation in PURE anzeigen
Beitrag in Fachzeitschrift
Jakob Woisetschläger Auf der Suche nach effizienten Triebwerken - Forschung in der Steiermark Publikation in PURE anzeigen
Andreas Fischer, Jörg König, Jürgen Czarske, Johannes Peterleithner, Jakob Woisetschläger and Thomas Leitgeb Analysis of flow and density oscillations in a swirl-stabilized flame employing highly resolving optical measurement techniques Publikation in PURE anzeigen
E C Fuchs, Adam D Wexler, A.H. Paulitsch-Fuchs, L L F Agostinho, Doekle Yntema and Jakob Woisetschläger The Armstrong experiment revisited Publikation in PURE anzeigen
Thomas Leitgeb, Thierry Schuller, Daniel Durox, Fabrice Giuliani, Stefan Köberl and Jakob Woisetschläger Interferometric determination of heat release rate in a pulsated flame Publikation in PURE anzeigen
Christian Heschl, Kiao Inthavong, Wolfgang Sanz and Jiyuan Tu Evaluation and Improvements of RANS turbulence models for Linear Diffuser Flows Publikation in PURE anzeigen
Tagungsbeitrag
Johannes Peterleithner, Andreas Marn, Thomas Leitgeb and Jakob Woisetschläger Frequency resolved density fluctuations measurements of combustion oscillations in a model combustor49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibt1589261-0 Publikation in PURE anzeigen
Jaana Rajamaeki, Fabrice Giuliani, Johannes Fritzer and Franz Heitmeir About low emission combustion with replacement fuels (Paper review)International Symposium on Air Breathing Engines1-8 Publikation in PURE anzeigen
Adam D Wexler, S Drusova, Elmar Christof Fuchs and Jakob Woisetschläger Development of an electrical method for including mesoscale state transitions in polar liquidsMesostructures and Dynamics in liquids and Solutions - Faraday Discussion 1670-0 Publikation in PURE anzeigen
Christian Faustmann, Andreas Lang and Fabrice Giuliani Measurement of the aerodynamics in the primary zone of a low-NOx combustor at atmospheric and isothermal conditionsTransonic and Supersonic Flow in Cascades and Turbomachines151-161 Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir DEVELOPEMENT OF A TURNING MID TURBINE FRAME WITH EMBEDDED DESIGN Part II: UNSTEADY MEASUREMENTSASME Turbo Expo1-10 Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir DEVELOPEMENT OF A TURNING MID TURBINE FRAME WITH EMBEDDED DESIGN Part I: DESIGN AND STEADY MEASUREMENTSASME Turbo Expo1-11 Publikation in PURE anzeigen
Dominik Broszat, Thorsten Selic and Andreas Marn Verification of the Inverse Cut-Off Effect in a Turbomachinery Stage; Part 2-Comparison to Experimental Results19th AIAA/CEAS Aeroacoustics Conference 2013, 34th AIAA Aeroacoustics Conference1-8 Publikation in PURE anzeigen
Christian Faustmann, Davide Lengani, Rosario Spataro, Andreas Marn, Emil Göttlich and Franz Heitmeir EXPERIMENTAL INVESTIGATION OF THE NOISE GENERATION AND PROPAGATION FOR DIFFERENT TURNING MID TURBINE FRAME SETUPS IN A TWO-STAGE TWO-SPOOL TEST TURBINEASME Turbo Expo1-11 Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Cornelia Santner and Franz Heitmeir A numerical comparison on the aerodynamic performances of a two-stage two-spool turbine facility predicted by steady and unsteady simulations10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics827-839 Publikation in PURE anzeigen
Abschlussarbeit
Günter Offner Structural Dynamics considering Mixed Lubricated Contacts applied for Internal Combustion Engines Publikation in PURE anzeigen
Sabine Bauinger Einfluss unterschiedlicher Turbinenübergangskanäle auf die Schallemissionen in einem zweistufigen Turbinenprüfstand Publikation in PURE anzeigen
Cornelia Santner Experimental Investigation of Turning Mid Turbine Frame Designs Publikation in PURE anzeigen
Josef Hubinka Konstruktion, Aufbau und Betriebsführung eines zweiwelligen Turbinenprüfstandes Publikation in PURE anzeigen
Thomas Leitgeb On the Design and Validation of a Variable Geometry Burner Concept Publikation in PURE anzeigen
Sonstiger Beitrag
Andreas Marn, Thorsten Selic and Dominik Broszat Preliminary Results and Ongoing Research Publikation in PURE anzeigen
Johannes Peterleithner, Andreas Marn, Thomas Leitgeb and Jakob Woisetschläger Frequency resolved density fluctuations measurements of combustion oscillations in a model combustor Publikation in PURE anzeigen
A D Wexler, S Drusova, E C Fuchs and Jakob Woisetschläger Development of an electrical method for including mesoscale state transitions in polar liquids Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir Developement of a Turning Mid Turbine Frame with Embedded Design Part II: Unsteady Measurements Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir Development of a Turning Mid Turbine Frame with Embedded Design Part I: Design and Steady Measurements Publikation in PURE anzeigen
Dominik Broszat, Thorsten Selic and Andreas Marn Verification of the Inverse Cut-Off Effect in a Turbomachinery Stage Part 2-Comparison to Experimental Results Publikation in PURE anzeigen
Andreas Marn, Thorsten Selic and Martin Hoeger Preliminary Results and Ongoing Research Publikation in PURE anzeigen
Andreas Marn, Thorsten Selic and Dominik Broszat Ergebnispräsentation MassiF-Effekt Publikation in PURE anzeigen
Oliver Borm, Oliver Schennach and Andreas Marn Einsatz eines Modell-Strahltriebwerks zur Studentenausbildung Publikation in PURE anzeigen
Federica Farisco, Stefan Rochhausen, Metin Korkmaz and Michael Schroll VALIDATION OF FLOW FIELD AND HEAT TRANSFER IN A TWO-PASS INTERNAL COOLING CHANNEL USING DIFFERENT TURBULENCE MODELS Publikation in PURE anzeigen
Christian Faustmann, Rosario Spataro, Davide Lengani, Andreas Marn, Emil Göttlich and Franz Heitmeir EXPERIMENTAL INVESTIGATION OF THE NOISE GENERATION AND PROPAGATION FOR DIFFERENT TURNING MID TURBINE FRAME SETUPS IN A TWO-STAGE TWO-SPOOL TEST TURBINE Publikation in PURE anzeigen

To top

Contact
image/svg+xml

Institute of Thermal Turbomachinery and Machine Dynamics

Graz University of Technology
Inffeldgasse 25/A
A-8010 Graz

Tel: +43 (0)316 873 - 7226
Fax: +43 (0)316 873 - 107226
ttmnoSpam@tugraz.at