Andreas Drexler, C. Bergmann, G. Manke, V. Kokotin, K. Mraczek, M. Pohl and W. Ecker
On the local evaluation of the hydrogen susceptibility of cold-formed and heat treated advanced high strength steel (AHSS) sheets
Materials Science and Engineering A
800,
2021
, DOI
, Link
Publikation in PURE anzeigen
Gean Henrique Marcatto de Oliveira, Henrique Solowej Medeiro Lopes, S. I. Talabi and Alessandra Lucas
Production of thermoplastic starch and poly (butylene adipate-co-terephthalate) films assisted by solid-state shear pulverization
Carbohydrate Polymers
258,
2021
, DOI
, Link
Publikation in PURE anzeigen
Ricardo Henrique Buzolin, Michael Lasnik, Alfred Krumphals and Maria Cecilia Poletti
Corrigendum: “Hot deformation and dynamic α-globularization of a Ti-17 alloy: Consistent physical model” (Materials & Design (2021) 197, (S0264127520308017), (10.1016/j.matdes.2020.109266))
Materials and Design
203,
2021
, DOI
, Link
Publikation in PURE anzeigen
Sergey V. Prikhodko, Dmytro G. Savvakin, Pavlo E. Markovsky, Olexander O. Stasuk, James Penney, Norbert Enzinger, Michael Gaskill and Frank Deley
Friction welding of conventional Ti-6Al-4V alloy with a Ti-6Al-4V based metal matrix composite reinforced by TiC
Welding in the World
65,
415-428,
2021
, DOI
, Link
Publikation in PURE anzeigen
Ricardo Henrique Buzolin, Michael Lasnik, Alfred Krumphals and Maria Cecilia Poletti
Hot deformation and dynamic α-globularization of a Ti-17 alloy
Materials and Design
197,
2021
, DOI
, Link
Publikation in PURE anzeigen
Marina Gontijo, Christian Hoflehner, Sergiu Ilie, Jakob Six and Christof Sommitsch
Holding Time Influence on the Hot Ductility Behavior of a Continuously Cast Low Alloy Steel
Metals
11,
1-17,
2021
, DOI
, Link
Publikation in PURE anzeigen
Natascha Zocoller Borba, Jorge F. dos Santos and S. T. Amancio-Filho
Hydrothermal aging of friction riveted thermoplastic composite joints for aircraft applications
Composite Structures
,
2021
, DOI
, Link
Publikation in PURE anzeigen
Anissa Bouali, Natalia M. André, M.R. Silva Campos, M. Serdechnova, Jorge F. dos Santos, S. T. Amancio-Filho and Mikhail L. Zheludkevich
Influence of LDH conversion coatings on the adhesion and corrosion protection of friction spot-joined AA2024-T3/CF-PPS
Journal of Materials Science & Technology
67,
197-210,
2021
, DOI
, Link
Publikation in PURE anzeigen
B. Callegari, L. Campo, K. Aristizabal, M. A. Guitar, F. Warchomicka, R. S. Coelho, P. P. Brito, F. A. Soldera, F. Mücklich and H. C. Pinto
In situ assessment of isochronal phase transformations in a lamellar Ti–5Al–5Mo–5V–3Cr–1Zr alloy using synchrotron X-ray diffraction
Journal of Alloys and Compounds
853,
2021
, DOI
, Link
Publikation in PURE anzeigen
Ernst Kozeschnik and T. Chandra Thermec'2021: Conference Proceedings Book - International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, ApplicationsConference proceedings book: International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications
, Link
Publikation in PURE anzeigen
Goncalo Filipe Pina Cipriano, W. S. de Carvalho, Pedro Vilaça and S. T. Amancio-Filho
Thermomechanical modeling of the metallic rivet in friction riveting of amorphous thermoplastics
Welding in the World
65,
855-864,
2021
, DOI
, Link
Publikation in PURE anzeigen
Aleksandra Vulović, Fernando Gustavo Warchomicka and Nenad Filipović Finite element analysis of surface modification of titanium alloy used for hip implantTHERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications1544-1548
, Link
Publikation in PURE anzeigen
Malihe Mohammadi, Alireza Akbari, Fernando Warchomicka and Luc Pichon
Depth profiling characterization of the nitride layers on gas nitrided commercially pure titanium
Materials Characterization
181,
2021
, DOI
, Link
Publikation in PURE anzeigen
Konstantin Manuel Prabitz, Mohammad Z. Asadzadeh, Marlies Pichler, Thomas Antretter, Coline Beal, Holger Schubert, Benjamin Hilpert, Martin Gruber, Robert Sierlinger and Werner Ecker
Liquid metal embrittlement of advanced high strength steel
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
S. A. Hosseini, Kh Gheisari, H. Moshayedi, M. R. Ahmadi, F. Warchomicka and N. Enzinger
Assessment of the chemical composition of LTT fillers on residual stresses, microstructure, and mechanical properties of 410 AISI welded joints
Welding in the World
65,
807-823,
2021
, DOI
, Link
Publikation in PURE anzeigen
Erenilton Pereira da Silva, Ricardo Henrique Buzolin, Ulises Alfaro, Guillermo Requena and Haroldo Calvalcanti Pinto
Microstructure and mechanical behavior of similar butt-joints of ZK60 and ZK60–1.5RE magnesium alloys produced by linear friction stir welding
Journal of Magnesium and Alloys
9,
1782-1796,
2021
, DOI
, Link
Publikation in PURE anzeigen
Armin Buchroithner, Peter Haidl, Rupert Preßmair, Hannes Wegleiter, Bernd Thormann, Thomas Kienberger, Peter Auer and Josef Domitner Grid Load Mitigation in EV Fast Charging Stations Through Integration of a High-Performance Flywheel Energy Storage System with CFRP RotorIGESSC 2021 Conference Proceedings (IEEE Xplore)
, Link
Publikation in PURE anzeigen
Florian Pixner, Ricardo Henrique Buzolin, Sebastian Schönfelder, David Theuermann, Fernando Gustavo Warchomicka and Norbert Enzinger
Contactless temperature measurement in wire-based electron beam additive manufacturing Ti-6Al-4V
Welding in the World
65,
1307-1322,
2021
, DOI
, Link
Publikation in PURE anzeigen
Mateusz Skalon, Benjamin Meier, Thomas Leitner, Siegfried Arneitz, S. T. Amancio-Filho and Christof Sommitsch
Reuse of Ti6Al4V Powder and Its Impact on Surface Tension, Melt Pool Behavior and Mechanical Properties of Additively Manufactured Components
Materials
14,
1-22,
2021
, DOI
, Link
Publikation in PURE anzeigen
Mariana Poliserpi, Pere Barriobero-Vila, Guillermo Requena, Laura Noel García, Alfredo Tolley, Cecilia Poletti, Tomáš Vojtek, Adam Weiser, Norbert Schell, Andreas Stark, Roberto Boeri and Silvana Sommadossi
TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
52,
1382-1394,
2021
, DOI
, Link
Publikation in PURE anzeigen
Josef Domitner, Zahra Silvayeh, Arash Shafiee Sabet, Kerem Ilyas Öksüz, Leonardo Pelcastre and Jens Hardell
Characterization of wear and friction between tool steel and aluminum alloys in sheet forming at room temperature
Journal of Manufacturing Processes
64,
774-784,
2021
, DOI
, Link
Publikation in PURE anzeigen
Florian Kerem Riedlsperger, Bernadette Gsellmann, Erwin Povoden-Karadeniz, Oriana Tassa, Susanna Matera, Mária Dománková, Florian Kauffmann, Ernst Kozeschnik and Bernhard Sonderegger
Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
Simona Kresser, Reinhold Schneider, Horst Zunko and Christof Sommitsch
Modelling and Simulation of Phase Formations in Martensitic Stainless Steels
Berg- und hüttenmännische Monatshefte
167,
23-28,
2021
, DOI
Publikation in PURE anzeigen
Andreas Drexler, Josef Domitner and Christof Sommitsch Modeling of Hydrogen Diffusion in Slow Strain Rate (SSR) Testing of Notched SamplesAdvances in Hydrogen Embrittlement Study87-111
, Link
Publikation in PURE anzeigen
Mariana Poliserpi, Ricardo Buzolin, Roberto Boeri, Cecilia Poletti and Silvana Sommadossi
Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
52,
1695-1707,
2021
, DOI
, Link
Publikation in PURE anzeigen
Franco Lizzi, Kashyap Pradeep, Aleksandar Stanojevic, Silvana Sommadossi and Maria Cecilia Poletti
Hot deformation behavior of a ni‐based superalloy with suppressed precipitation
Metals
11,
2021
, DOI
, Link
Publikation in PURE anzeigen
G.H.M. Oliveira, J.M.O. Silva, S. T. Amancio-Filho, Rene Martim Volu, Getúlio Vasconcelos, R. Riva and Leonardo Bresciani Canto INJECTION OVER-MOLDED POLYCARBONATE-ALUMINUM COMPOSITE STRUCTURESProceedings of the 5th Brazilian Conference on Composite Materials – BCCM 5
Publikation in PURE anzeigen
Christoph Holzinger, Stefan Peters, Andreas Trummer, Jana Marie Rieth, Bernhard Freytag and Norbert Enzinger
3D Welding - Optimierte Bauelemente aus dem Metalldrucker
GAM - Graz Architecture Magazine
2021,
243-244,
2021
Publikation in PURE anzeigen
Christian Hoflehner, Christof Sommitsch, Marina Melo Gontijo, Jakob Six and Sergiu Ilie Effect of stain rate on hot ductility of a Ti-Nb microalloyed steel
Publikation in PURE anzeigen
Sara Ferraris, Fernando Gustavo Warchomicka, Jacopo Barberi, Andrea Cochis, Alessandro Calogero Scalia and Silvia Spriano
Contact Guidance Effect and Prevention of Microfouling on a Beta Titanium Alloy Surface Structured by Electron-Beam Technology
Nanomaterials
11,
1-13,
2021
, DOI
, Link
Publikation in PURE anzeigen
Mustafa Tümer, Josef Domitner and Norbert Enzinger
Electron beam and metal active gas welding of ultra-high-strength steel S1100MC
International Journal of Advanced Manufacturing Technology
,
2021
, DOI
, Link
Publikation in PURE anzeigen
Arash Shafiee Sabet, Josef Domitner, Kerem Öksüz, Emir Hodzic, Hector Torres, Manel Rodriguez Ripoll and Christof Sommitsch
Tribological investigations on aluminum alloys at different contact conditions for simulation of deep drawing processes
Journal of Manufacturing Processes
68,
546-557,
2021
, DOI
, Link
Publikation in PURE anzeigen
S. Kalikina, E. Belyaevskaya, Anton Naumov, Oleg Panchenko and S. T. Amancio-Filho Students Project Marathon as new format of practice-oriented education for environmental safety and sustainable development
Publikation in PURE anzeigen
Ernst Plesiutschnig, Mihaela Albu, David Canelo Yubero, V. Razumovskiy, Andreas Stark, Norbert Schell, Gerald Kothleitner, Coline Beal, Christof Sommitsch and Ferdinand Hofer
An In Situ Synchrotron Dilatometry and Atomistic Study of Martensite and Carbide Formation during Partitioning and Tempering
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
Rafael Paiotti Marcondes Guimaraes, N Enzinger, Josefine Hobisch, Ali Mahdi, Florian Pixner, Thomas Rath, Gregor Trimmel and S. T. Amancio-Filho Wire-based directed energy deposition of Ni-rich NiTi alloy
Publikation in PURE anzeigen
C. Ferreira-Palma, M. C. Poletti, R. M. Pineda-Huitron, V. M. López-Hirata, D. I. Rivas-López and H. J. Dorantes-Rosales
Effects of Cr on NiAl (β′) Precipitation in Ferritic Fe-Ni-Al Alloys
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
52,
3777-3787,
2021
, DOI
, Link
Publikation in PURE anzeigen
Lisa Minkowitz, Siegfried Arneitz, Pedro Effertz and S. T. Amancio-Filho Additive manufacturing of two aluminium alloys for the application in aviation
Publikation in PURE anzeigen
Seyed M. Goushegir, Jorge F. dos Santos and S. T. Amancio-Filho
Fatigue Performance of Metal–Composite Friction Spot Joints
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
Rielson Falck and S. T. Amancio-Filho Influence of the composite structural parameters on the mechanical performance of additively manufactured composite-metal hybrid materials
Publikation in PURE anzeigen
A. A. Alkhalaf, Anna Tesleva, Pavel Polyakov, Matthias Moschinger, Sebastian Fritsche, Iuliia Morozova, Anton Naumov, Fedor Isupov, Goncalo Filipe Pina Cipriano and S. T. Amancio-Filho Modified Friction Stir Welding of Al–Zn–Mg–Cu Aluminum AlloyFriction Stir Welding and Processing XI43-51
, Link
Publikation in PURE anzeigen
Rielson Falck and S. T. Amancio-Filho Low velocity impact response of aluminum 2024-T3 / polyamide 6 / carbon-fiber-reinforced polyamide 6 hybrid joints produce by AddJoining
Publikation in PURE anzeigen
W. S. de Carvalho, Francesco Marzemin and S. T. Amancio-Filho Statistical-based optimization of mechanical performance in FFF-printed unreinforced and short-carbon-fiber-reinforced PEEK
Publikation in PURE anzeigen
Carlos Alberto Belei Feliciano, Benjamin Meier and S. T. Amancio-Filho Using raw LPBF surfaces to improve the strength of metal-polymer hybrid joints produced by Additive Manufacturing
Publikation in PURE anzeigen
Willian Sales de Carvalho, Maura Catalina Vioreanu, Maxime Rodolphe Alexis Lutz, Goncalo Filipe Pina Cipriano and S. T. Amancio-Filho
The Influence of Tool Wear on the Mechanical Performance of AA6061-T6 Refill Friction Stir Spot Welds
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
Carlos Alberto Belei Feliciano, Jana Joeressen and S. T. Amancio-Filho Mechanical performance optimization and investigation of the effects of process parameters on the fused-filament fabrication of polyamide-6 reinforced by short carbon fibers
Publikation in PURE anzeigen
Hannes Oberlercher, Alexander Berndt, C. Becker, F. O. Riemelmoser, M. Laux, R. Heim and S. T. Amancio-Filho Overview of different consolidation models in additive manufacturing of continuous fiber composites their development and initial results
Publikation in PURE anzeigen
Marta Orlowska, Florian Pixner, Andreas Hütter, Agnieszka Kooijman, Cezary Jasinski, Yaiza Gonzalez-Garcia, N Enzinger and Małgorzata Lewandowska
Local changes in the microstructure, mechanical and electrochemical properties of friction stir welded joints from aluminium of varying grain size
Journal of Materials Research and Technology
15,
5968-5987,
2021
, DOI
, Link
Publikation in PURE anzeigen
S. T. Amancio-Filho Progress on Metal-composite Spot Joints Produced With Frictional Heating - a Literature Review
Publikation in PURE anzeigen
Mustafa Tümer, Florian Pixner and N Enzinger
Residual Stresses, Microstructure, and Mechanical Properties of Electron Beam Welded Thick S1100 Steel
Journal of Materials Engineering and Performance
,
2021
, DOI
, Link
Publikation in PURE anzeigen
A. A. Alkhalaf, Anna Tesleva, Pavel Polyakov, Matthias Moschinger, Sebastian Fritsche, Iuliia Morozova, Anton Naumov, Fedor Isupov, Goncalo Filipe Pina Cipriano and S. T. Amancio-Filho Modified Friction Stir Welding of Al-Mg-Cu-Zn Aluminum Alloy
Publikation in PURE anzeigen
Elena Mora, Aitor Navarro, Elena Silveira, Cecilia Poletti, Joseba Mendiguren and Iñaki Hurtado Initiation of dynamic recrystallization of as-cast N08028 alloyESAFORM 2021 - 24th International Conference on Material Forming
, Link
Publikation in PURE anzeigen
Carlos Alberto Belei Feliciano and S. T. Amancio-Filho Influence of volumetric flow on the mechanical properties of short carbon fiber-reinforced polyamide parts printed by Fused Filament Fabrication
Publikation in PURE anzeigen
Zahra Sajedi, Riccardo Casati, Maria Cecilia Poletti, René Wang, Fatemeh Iranshahi and Maurizio Vedani
Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting
International Journal of Fatigue
152,
2021
, DOI
, Link
Publikation in PURE anzeigen
Christof Sommitsch Numerical Modelling and Simulation of Metal Processing978-3-0365-1080-4
, Link
Publikation in PURE anzeigen
Josef Domitner, Peter Auer and Christof Sommitsch Numerical Simulation of Tube Bending Supported by Hydraulic Pressure for Manufacturing Butt-Welding FittingsForming the Future2019-2029
, Link
Publikation in PURE anzeigen
Mihaela Albu, B. Panzirsch, Hartmuth Schröttner, Stefan Mitsche, Klaus Reichmann, Maria Cecilia Poletti and Gerald Kothleitner
High-Resolution Microstructure Characterization of Additively Manufactured X5CrNiCuNb17-4 Maraging Steel during Ex and In Situ Thermal Treatment
Materials
14,
2021
, DOI
, Link
Publikation in PURE anzeigen
W. S. de Carvalho, N. Enzinger and S. T. Amancio-Filho On the feasibility of Ultrasonic Joining of 3D-printed PEEK to rolled AISI 304 stainless steel reinforced with cold metal transfer welded pins
Publikation in PURE anzeigen
Martin Zubcak, Jaroslav Soltes, Mariia Zimina, Thomas Weinberger and Norbert Enzinger
Investigation of al-b4c metal matrix composites produced by friction stir additive processing
Metals
11,
2021
, DOI
, Link
Publikation in PURE anzeigen
Bruna Callegari, Lucia Campo, Katherine Aristizabal, Maria Agustina Guitar, Fernando Gustavo Warchomicka, Rodrigo Santiago Coelho, Pedro Paiva Brito, Flavio Soldera, Frank Mücklich and Haroldo Cavalcanti Pinto
In situ assessment of isochronal phase transformations in a lamellar Ti–5Al–5Mo–5V–3Cr–1Zr alloy using synchrotron X-ray diffraction
Journal of Alloys and Compounds
853,
2021
, DOI
, Link
Publikation in PURE anzeigen
Reinhold Schneider, Simone Kaar, Daniel Krizan and Christof Sommitsch
Comparison of the Hardness-Toughness Relationship of Medium-Mn Steels after Q&T and Q&P Treatments*
HTM - Journal of Heat Treatment and Materials
76,
445-457,
2021
, DOI
, Link
Publikation in PURE anzeigen
Peter Auer, Tobias Lohinger, Markus Unterrainer, Andreas Burböck, Christof Sommitsch and Josef Domitner Comparison of numerical models for investigating deep drawing of thin-walled steel cups
Publikation in PURE anzeigen
Ricardo Henrique Buzolin, David Canelo Yubero, Fernando Gustavo Warchomicka, Michael Lasnik, Alfred Krumphals and M. C. Poletti
Refinement of the Ti-17 microstructure after hot deformation: Coupled mesoscale model
Materials Science and Engineering A
800,
2021
, DOI
, Link
Publikation in PURE anzeigen
Efthymia Vakalopoulou, Thomas Rath, Fernando Gustavo Warchomicka and Gregor Trimmel Polystyrene microspheres as template for the formation of honeycomb-structured metal sulfide thin films
Publikation in PURE anzeigen
Andreas Drexler, Liese Vandewalle, Tom Depover, Kim Verbeken and Josef Domitner
Critical verification of the Kissinger theory to evaluate thermal desorption spectra
International Journal of Hydrogen Energy
46,
39590-39606,
2021
, DOI
, Link
Publikation in PURE anzeigen
Ricardo Henrique Buzolin, Michael Lasnik, Alfred Krumphals and Maria Cecilia Poletti
A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy
International Journal of Plasticity
136,
2021
, DOI
, Link
Publikation in PURE anzeigen
Simone Kaar, Katharina Steineder, Reinhold Schneider, Daniel Krizan and Christof Sommitsch
New Ms-formula for exact microstructural prediction of modern 3rd generation AHSS chemistries
Scripta Materialia
200,
2021
, DOI
, Link
Publikation in PURE anzeigen
M. Wallner, R. Schneider, K. Steineder and C. Sommitsch
Effect of Si and Al on microstructure-property-relationship of Q&P-steels during galvannealing
Materials Science and Technology (United Kingdom)
37,
182-189,
2021
, DOI
, Link
Publikation in PURE anzeigen
Armin Paar, Michael Aigner, Coline Beal and Christof Sommitsch
Metallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling Mills
Materials Science Forum
2021,
1085-1090,
2021
, DOI
, Link
Publikation in PURE anzeigen