Internal - External IMAT Seminars

133rd IMAT Seminar / 02.10.2020

132nd online IMAT Seminar / 04.09.2020

131st online IMAT Seminar / 24.07.2020

130th online IMAT Seminar / 26.06.2020

129th online IMAT Seminar / 29.05.2020

128th online IMAT Seminar / 08.05.2020

127th IMAT Seminar / 28.01.2020

126th IMAT Seminar / 06.12.2019

Topic "Critical insights into thermophysical modeling for predictive material simulations"
Lecturer: Ass.Prof. Dr. Sc. ETH Erwin Povoden-Karadeniz
TU Wien

125th IMAT Seminar / 03.12.2019
Topic: "Tribology Research at Lulea University"
Lecturer: Assoc.Prof. Jens Hardell
Lulea University of Technology

124th IMAT Seminar / 08.11.2019

123rd IMAT Seminar / 30.10.2019

Topic: „Wire and Arc Additive Manufacturing“
Assoc. Prof. Oleg Panchenko, PhD
Peter the Great St. Petersburg Polytechnic University

„Friction Stir Welding“
Lecturer: Assoc. Prof. Dr. Anton A. Naumov
Peter the Great St. Petersburg Polytechnic University

122nd IMAT Seminar / 04.10.2019

122nd IMAT Seminar / 10.09.2019

121st IMAT Seminar / 06.08.2019

120th IMAT Seminar / 03.07.2019

119th IMAT Seminar / 07.06.2019

118th IMAT Seminar / 24.05.2019

Topic: Overview of Physics, Modeling, and Metallurgy Research at Canadian Centre for Welding and Joining
Lecturer: Prof. Patricio F. Mendez
University of Alberta

117th IMAT Seminar / 03.05.2019
Topic: Brittle fracture in polymer-based nanocomposites under complex loading
Lecturer: Prof. Majid R. Ayatollahi
School of Mechanical Engineering, Iran University of Science and Technology Theran

116th IMAT Seminar / 05.04.2019
Topic: Continuous severe plastic deformation: introduction of a novel method
Lecturer: Motjaba Pourbashiri
Iran University of Science and Technology

Topic: Observation of the Behavior of Inconel 718
Lecturer: Mateo Gasselin
University of Bordeaux

115th IMAT Seminar / 08.03.2019
Lecturer: Prof. Mauzizio Vedani
Politechnico di Milano, Departement of Mechanical Engineering

Topic: Thermo-mechanical Fatigue Behavior of ALSi7Mg Alloy Processed by Selective Laser Melting
Lecturer: Zahra Sajedi
Politechnico Milano

Topic: Study on the chemical composition effects of LTT fillers in the welding residual stress of martensitic stainless steel
Seyed Ali Hoseini
Shahid Chamran University of Ahvaz, Iran

114th IMAT Seminar / 01.02.2019
Topic: Dynamisch Mechanische Analyse bei Anton Paar
Lecturer: Dipl.-Ing. Alexander Troiss

113th IMAT Seminar / 07.12.2018

112th IMAT Seminar / 09.11.2018

Topic: Effect of composition on the precipitation of β’ in ferritic Fe-Ni-Al alloys
Lecturer: Carlos Ferreira
National Polytechnic Institute - Department of Metallurgy and Materials Engineering, Mexiko

111th IMAT Seminar / 12.10.2018
Topic: Characterization of Cu-In-Sn isopleths for Pb free Transient Liquid Phase Bonding
Lecturer: Prof. Dr. Silvana Sommadossi
Universidad Nacional del Comahue, Agentinia

Topic: Effect of high temperature preheating to processing Ti6Al4V alloy by Selective Laser Technology
Lecturer: Ing. Martin Maly
Brno University of Technology

110th IMAT Seminar / 14.09.2018
Topic: Mechanical integrity and corrosion behavior of metal-composite structures joined by FSpJ
Lecturer: Natalia Manente

Topic: Design and mechanical integrity of friction-riveted multi-material joints for aircraft structures
Lecturer: Natascha Zocoller Borba

Topic: AddJoining: a new additive manufacturing technique for layered metal-polymer hybrid structures
Lecturer: Rielson Falck

Helmholtz - Zentrum Geesthacht, GermanyInstitute of Materials Research, Materials Mechanics, Joining Solid State Joining Processes (WMP), Advanced Polymer-Metal Hybrid Structures' Group

109th IMAT Seminar / 17.08.2018
Topic: Hot deformation behaviour of precipitates free Inconel 718
Lecturer: Franco Lizzi
National University of Comahue, Argentina

Topic: The effect of electron beam surface treatment on corrosion behavior of biodegradable magnesium implant
Lecturer: Arezzo Ghanbari
Institute of Materials and Energy Alborz

108th IMAT Seminar / 29.06.2018

107th IMAT Seminar / 08.06.2018
Topic: Clad Layer caracteristic in coopler clad aluminum wire
Lecturer: Fariborz Fatehi Sichani
University of Birjand

Topic: Electron Beam Welding of metallic glass foil
Lecturer: Mircea Nicolaescu
Polytechnic University of Timisoara

106th IMAT Seminar / 13.04.2018
Topic: Microstructure characterisation of Titanium alloys
Lecturer: Paul Berrus

Topic: Metallographic investigation of a pure aluminium wire reinforce by SPD process and contribution to simulation of an ECAP process to improve teh actual SPD machine
Lecturer: Thomas Clavelou
University of Bordeaux

105th IMAT internal Seminar / 18.05.2018
Topic: Phase identification in Ni based materials bonded with TLPB
Lecturer: Mariana Polliserpi
National University of Comahue, Argentina

Topic: Clad layer characteristic in copper clad aluminium wire
Lecturer: Fariborz Fatehi Sichani
University of Birjand

104th IMAT internal Seminar / 23.03.2018
Topic 1: Use of fracture mechanics on friction welded joint
Lecturer: Doc. Dr. Tomaž Vuherer

Topic 2: Genetic programming approach for modelling of deep drawing process parameters
Lecturer: Ass.Prof. Dr. Leo Gusel

Topic 3: Overview of experimental methods for thermomechanical data
Lecturer: Assoc.Prof. Cecilia Poletti

103rd IMAT internal Seminar / 26.01.2018
Topic: Evaluation of the corrosion resistance performance of different zinc coatings in 0.5 M sodium chloride solution
Lecturer: Franz Miller Branco Ferraz

102nd IMAT internal Seminar / 01.12.2017
Topic 1: Mg/HAp Metal Matrix Bio-Composite (Fabrication and Characterization of Mechanical and Microstructural properties)
Lecturer: Arash Shafiee Sabet, Fogh-lis. Lis

Topic 2: READY FOR RAMP-UP? - A framework to define and assess ramp-up readiness of advanced materials for high-tech applications
Lecturer: Dipl.-Ing. Martin Kremsmayr

Topic 3: Study to understand reversible temper embrittlements of high strength steel
Lecturer: Em.-Prof. Horst Cerjak

101st IMAT internal Seminar / 03.11.2017
Topic: JOIN M2 und M3
Lecturer: Dipl.-Ing. Christian Schneider

100th IMAT internal Seminar / 09.10.2017
Topic: Introduction of the new optical 3D measurement system at IMAT-T&F
Lecturer: DDDipl.-Ing. Dr.mont Josef Domitner

99th IMAT internal Seminar / 09.10.2017
Topic: What can you expect to measure, and what does it mean?
Lecturer: Univ.-Prof. Bernhard Sonderegger

98th IMAT internal Seminar / 26.07.2017
Topic: General Solution to Heat flow problem in Welding
Lecturer: Mohammad Bagher Nasiri, Fogh-lis.

97th IMAT external Seminar / 26.07.2017
Topic: Flusssäure - Handhabung und gute Laborpraxis (GLP)
Lecturer: Dipl.-Chem. Dr.rer.nat. Alk Dransfeld

96th IMAT internal Seminar / 07.07.2017
Topic: Magnesium alloys: Processing & Characterization techniques
Lecturer: Eng. Mestr. Ricardo Henrique Buzolin

95th IMAT internal Seminar / 07.07.2017
Topic: Physical simulation studies on weldability of high strength steel for naval application
Lecturer: M.Tech. B. Tech Kumar Sanjeev

94th IMAT external Seminar / 06.07.2017
Topic: Numerical simulation of laser material processing: model basics and case studies
Lecturer: Univ. Prof. Dr.-Ing. Dipl. Phys. Andreas Otto

93rd IMAT internal Seminar / 05.05.2017
Topic: Rotary Friction Welding of Molybdenum Components
Lecturer: Dipl.-Ing. Markus Stütz

92nd IMAT external Seminar / 21.02.2017
Topic: Research in Applied Computer Science and Modeling at the AGH Krakow
Lecturer: Krzysztof Bzowski; Mateusz Sitko; Grzegorz Smyk

91st IMAT internal Seminar / 07.02.2017
Topic: FMEA - Stand der Technik und Entwicklungstendenzen
Lecturer: Boris Petrovic, Dipl.-Ing.

90th IWS external Seminar / 28.11.2016
Topic: Hot work tool steels manufactured by selective laser melting
Lecturer: Jochen Giedenbacher, MSc.

89th IWS external Seminar / 05.07.2016
Topic: Deformation behavior and microstructure-texture in TWIP steels after deformation at varying strain rates
Lecturer: Dr. Sandip Ghosh Chowdhury from National Metallurgical Laboratory, India

88th IWS external Seminar / 28.04.2016
HITEMAL (high temperature aluminium): unique ultrafine-grained Al composites stabilized in situ by nano-scale Al2O3 phase
Martin Balog

87th IWS internal Seminar / 07.04.2016
Embrittlement of high strenght weld metal due to post weld heat treatmen (PWHT)
Horst Cerjak

86th IWS external Seminar  / 09.03.2016
Topic: The latest developments and applications associated with Solid State Joining and Friction Extrusion Technology
Michael Skinner

85th IWS external Seminar / 25.02.2016
Electron Beam Characterization
Sebastian Ufer

84th IWS external  Seminar / 24.02.2016
Topic: Magnesium research in the Helmholtz-Zentrum Geesthacht
Norbert Hort

83rd IWS internal Seminar / 17.02.2016
Topic: Friction Stir Welding of HSLA Steel X70 doped with TiO2
Rasul Pouriamanesh

82nd IWS external  Seminar / 10.02.2016
Topic: Insights into phase transformations and microstructure development of TiAl alloys by use of advanced characterisation techniques
Florian Pyczac

81st IWS external Seminar /03.02.2016
Conzepts to Optimize Aging of Al-Mg-Si alloys
 Stefan   Pogatscher

Other Conferences and Seminars

43. VDI-Jahrestagung Schadensanalyse - Schäden an geschweißten Bauteilen
18. bis 19. Okgober 2017 in Würzburg
Programm und weiterführende Informationen

"Auswirkung einer falschen Spannungsarmglühung beim Schweißen hochfester Stähle",
Prof. Enzinger, em. Prof. Cerjak

Lange Nacht der Forschung
22. April 2016

Lange Nacht der Forschung
04. April 2014

Lange Nacht der Forschung
27. April 2012

Gleeble Workshop 2012 - Final Programme
TU Graz, 27. - 28. February 2012

Hot Cracking Workshop
TU Graz, 14. Dezember 2010

TU Graz, 8. - 9. November 2010

CDL-workshop at Semmering
Semmering, 2. - 3. October 2009

International Conference on Safety and Reliability of Welded Components in Energy and Processing Industry
Graz, 10th - 11th July 2008

IIW 61st Annual Assembly 2008
Graz, 6th - 11th July 2008

FSW - Kolloquium 23.05.2006
Graz, 23.05.2006

High Strength Steels for Hydropower PlantsGraz
5th - 6th July 2005

Contact IMAT Seminars

Institute of Materials Science, Joining and Forming
Graz University of Technology

Dipl.-Ing. René Wang
Phone: +43 316 873 1659