Robert Schmid, Georg Hansemann, Michael Autischer and Joachim Juhart Adaptive foam concrete in digital fabrication Digital Concrete 2022
Alexander Passer Nachhaltiges Bauen
Matthias Moschinger, Florian Mittermayr and Norbert Enzinger Influence of Beam Figure on Porosity of Electron Beam Welded Thin-Walled Aluminum Plates
Lukas G. Briendl, Cyrill Grengg, Bernhard Müller, Günther Koraimann, Florian Mittermayr, Patrick Steiner and Isabel Galan In situ pH monitoring in accelerated cement pastes
Dominik Maierhofer, Martin Röck, Marcella Ruschi Mendes Saade, Endrit Hoxha and Alexander Passer Critical life cycle assessment of the innovative passive nZEB building concept ‘be 2226’ in view of net-zero carbon targets
Lukas G. Briendl, Florian Mittermayr, Rudolf Röck, Florian R. Steindl, Marlene Sakoparnig, Joachim Juhart, Fatemeh Iranshahi and Isabel Galan The hydration of fast setting spray binder versus (aluminum sulfate) accelerated OPC
Viet Tue Nguyen, Markus Krüger, Bernhard Freytag and Thomas Markus Laggner 5. Grazer Betonkolloquium
Barbara Truger, Stefan Nabernegg, Teresa Lackner, Martin Röck, Nicolas Alaux, Endrit Hoxha, Marcella Ruschi Mendes Saade and Alexander Passer Life cycle GHG emissions of the Austrian building stock Life cycle GHG emissions of the Austrian building stock
Florian Painer, Andre Baldermann, Florian Gallien, Stefanie Eichinger, Florian Steindl, Reiner Dohrmann and Martin Dietzel Synthesis of Zeolites from Fine-Grained Perlite and Their Application as Sorbents
Tajda Potrc Obrecht, Alexander Passer, Nicolas Alaux and Dominik Maierhofer IEA Annex 72
Joachim Juhart CO2-armer Beton - Entwurf und Bauausführung 5. Grazer Betonkolloquium
Lukas Briendl, Markus Krüger, Florian Mittermayr and Joachim Juhart A practical model to predict the flow of water-powder mixes and its application to mix design of cementitious blends
Barbara Truger, Alexander Passer, Nicolas Alaux, Marco Scherz, Helmuth Kreiner, Michael Kriechbaum, Günter Getzinger, Stefan Nabernegg, Teresa Lackner and Karl Steininger ParisBuildings
Yunus Seyrek and Kamile Tosun Felekoğlu Selection of proper matrix with plasma-treated HTPP fiber reinforced cementitious composites in terms of flexural toughness
Robert Schmid, Georg Hansemann, Joachim Juhart and Michael Autischer Adaptive Foam Concrete in Digital Fabrication Third RILEM International Conference on Concrete and Digital Fabrication 22-28
D. Rüdisser, R. S. McLeod, W. Wagner and C. J. Hopfe Numerical derivation and validation of the angular, hemispherical and normal emissivity and reflectivity of common window glass
B. Soust-Verdaguer, I. Bernardino Galeana, C. Llatas, M. V. Montes, E. Hoxha and A. Passer How to conduct consistent environmental, economic, and social assessment during the building design process. A BIM-based Life Cycle Sustainability Assessment method