Journal Article
Madeleine Bali and Annette Muetze Influence of Different Cutting Techniques on the Magnetic Characteristics of Electrical Steels Determined by a Permeameter
Madeleine Bali and Annette Mütze Modeling the Effect of Cutting on the Magnetic Properties of Electrical Steel Sheets
Werner Konrad, Gerald Josef Deboy and Annette Mütze A Power Supply Achieving Titanium Level Efficiency for a Wide Range of Input Voltages
Annette Mütze, Javier Martinez Garcia Tenorio and Anouar Belahcen Analysis of the vibration magnitude of an induction motor with different numbers of broken bars
Javier Martinez Garcia Tenorio, Klaus Krischan and Annette Mütze Minimization of a SynRel’s oscillating torque by calculation of the appropriate skew angle
Roland Sleik, Michael Glavanovics, Sascha Einspieler, Annette Mütze and Klaus Krischan Modular Test System Architecture for Device, Circuit, and System Level Reliability Testing and Condition Monitoring
Stefan Leitner, Mehrdad Yazdanian, Ali Mehrizi-Sani and Annette Mütze Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers
Jero Ahola, Alexsei Romanenko and Annette Mütze Incipient bearing damage montoring of 940-h variable speed drive operation
Christian Josef Paar and Annette Mütze Influence of dry clutch and ICE transmission integration on the thermal load of a PM based integrated starter-generator
Christian Josef Paar and Annette Mütze Quantification of external heat load on HEV intgrated IPMs unsing the air-gap shear-stress
Heinrich Eickhoff, Roland Seebacher, Annette Mütze and Elias G Strangas Enhanced and fast detection of open switch faults in inverters for electric drives
Alexander Connaughton, Arash P. Talei, Kennith Leong, Klaus Krischan and Annette Mütze Investigation of a soft-switching flyback converter with full secondary side based control
Madeleine Bali, Herbert De Gersem and Annette Muetze Determination of Original Nondegraded and Fully Degraded Magnetic Characteristics of Material Subjected to Laser Cutting
Madeleine Bali and Annette Muetze The influence of cutting on the magnetic properties of electrical steel sheets and its modeling in electric machine design
Conference/Workshop Article
Jens Gächter, Mario Hirz and Roland Seebacher The Effect of Rotor Position Errors on the Dynamic Behavior of Field-Orientated Controlled PMSM Electric Machines and Drives Conference (IEMDC), 2017 IEEE International
Johann Wilfried Hopfgartner, Stefan Posch, Bernhard Zuber, Raimund Almbauer, Klaus Krischan and Stefan Stangl Reduction of the suction losses through reed valves in hermetic reciprocating compressors using a magnet coil Proceedings of the International Conference on Compressors and their Systems 2017, London, GB
Klaus Krischan, Uwe Schichler, Bernd Deutschmann, Markus Reichhartinger, Bernhard Auinger, Franz Vollmaier, Martin Horn and Herwig Renner GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – Background and Design 15. EMV-Fachtagung / Leistungselektronikschau 41
Bernd Deutschmann, Bernhard Auinger, Franz Vollmaier, Klaus Krischan, Uwe Schichler, Martin Horn, Markus Reichhartinger and Herwig Renner GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – The Electronic System 15. EMV-Fachtagung / Leistungselektronikschau 42
Jens Gächter, Mario Hirz and Roland Seebacher Impact of Rotor Position Sensor Errors on Speed Controlled Permanent Magnetized Synchronous Machine 12th IEEE International Conference on Power Electronics and Drive Systems (IEEE PEDS 2017) 822-830
Thomas Tanzer, Helmut Pregartner, M Riedenbauer, R. Labinsky, M. Witlatschil, Annette Mütze and Klaus Krischan Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers 1-6
Thomas Tanzer, Helmut Pregartner, R. Labinsky, M. Witlatschil, Annette Mütze and Klaus Krischan Magnetostriction and its relation to the no-load noise of power transformers Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers 1-6
Roland Sleik, Michael Glavanovics, Klaus Krischan and Annette Mütze Performance enhancement of a modular test system for power semiconductors for HTOL testing by use of an embedded system Proc. 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe) 1-8
Michael Rios, Giri Venkataramanan and Annette Mütze Foil conductor concentrated coil windings for modular permanent magnet AC machines 2017 IEEE Energy Conversion Congress and Exposition (ECCE) 1191 - 1196
Heinrich Eickhoff, Elias G Strangas and Annette Mütze Electric machine utilization during the post-fault operation after inverter open circuit faults Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) 201-207
Hannes Grübler, Stefan Leitner, Annette Muetze and Gerhard Schoener Improved Switching Strategy for a Single-Phase Brushless Direct Current Motor and its Impact on Motor Efficiency 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017
Madeleine Bali and Annette Mütze The degradation depth of electrical steel sheets due to mechanical and laser cutting Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) 201-207
Alexander Connaughton, Kennith Leong, Gerald Deboy, Arash P. Talei and Giuseppe Bernacchia Quasi-Constant Frequency Secondary Side Controlled Flyback Concept with Variable ON-Time PCIM Europe 2017; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management; Proceedings of
Thesis
Felix Krall Analysis and Implementation of Algorithms for Calculation of Iron Losses for Fractional Horsepower Electric Motors
Other Article
Hannes Grübler, Stefan Leitner, Annette Mütze and Gerhard Schöner Improved Switching Strategy for a Single-Phase Brushless Direct Current Motor and its Impact on Motor Efficiency
Hannes Grübler, Stefan Leitner, Annette Mütze and Gerhard Schöner Christian Doppler Laboratory for Brushless Drives for Pump and Fan Applications
Stefan Leitner, Mehrdad Yazdanian, Ali Mehrizi-Sani and Annette Mütze Small-Signal Stability Analysis of an Inverter-Based Microgrid with Internal Model–Based Controllers
Thomas Tanzer, Helmut Pregartner and Annette Mütze Magnetostriction and its relation to the no-load noise of power transformers
Thomas Tanzer, Helmut Pregartner, Annette Mütze and Klaus Krischan Magnetic properties and their relation to the no-load noise and no-load losses of large power transformers
Michael Rios, Giri Venkataramanan and Annette Mütze Foil conductor concentrated coil windings for modular permanent magnet AC machines
Roland Sleik, Michael Glavanovics, Klaus Krischan and Annette Mütze Performance enhancement of a modular test system for power semiconductors for HTOL testing by use of an embedded system
Klaus Krischan, Uwe Schichler, Bernd Deutschmann, Markus Reichhartinger, Bernhard Auinger, Franz Vollmaier, Martin Horn and Herwig Renner GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – Background and Design
Bernd Deutschmann, Bernhard Auinger, Franz Vollmaier, Klaus Krischan, Uwe Schichler, Martin Horn, Markus Reichhartinger and Herwig Renner GriDConv: HVDC-DC Converter for High Voltage Direct Current Transmission Systems – The Electronic System
Contact
image/svg+xml

Electric Drives and Machines Institute
Inffeldgasse 18/1
A-8010 Graz

Tel.:  + 43 (0) 316 873 - 7241
Fax.: + 43 (0) 316 873 - 7244
Email: liane.hochgatterernoSpam@tugraz.at